Products Quality Standard
 1) Dimensions of container corner
   Chemical Composition
   Machinical Performance
   Technical Requirements
 2) Rear Corner Post-inner for Container
  Technical Requirements
   Chemical intergrents and mechanical performance

 

Dimension of Rear Corner Post-inner for Container
Specification
Symbol
b
d
L
Verticality
Dimension
38.5
40
10
12
2352;2657
Tolerance
+0
-1
+0.7
-0.3
+0
-1
B vertical A not more than 1mm.
Note:b、d、L tolerance dimension subject to contract

Technical Requirements
1.  Dimension and tolerance:see Scratch and Table 1
2.  Bending: 1) Length of amplitude direction where bending every one meter not more than 1 mm, overall length not more 2mm
      2) Bending of overall length lateral not more than 1mm
      3) Bending of amplitude transverse direction not more than 0.3mm
3.  Torsion:Torsion of amplitude area overall not more than 2mm
4.  Surface: 1) Without any crack and defect on surface
      2) Not over 0.3mm obvious over lapping furrow on surface
      3) Not over 0.33mm slag on surface.
      4) Without corrosion pitting and greasy dirt on surface
5.  Delivery condition: hot roller
6.  Supplier must provide "Products Quality Certificate" (include "report of batch number、chemical and mechanical performance)
7.  Standard: JH/TA01-2000(August 2000)
2003 ©copyright JiangMen Xinhui YILI Sectionsteel CO.LTD & YILI container Fittings co.ltd. All rights reserved.